Optima+ Asia
Specialists In Engineering Plastics
Our Products
Polycarbonate (PC) Sheets
PC Sheets (Clear / Colour)
Product Features
Optima+ polycarbonate (PC) solid sheets are manufactured by the extrusion technology. The superior characteristics provide an opportunity for design freedom and make it an ideal choice for a variety of applications.
-
Light weight and easy
-
Excellent light transmittance up to 90-92% (depends on thickness)
-
Heat and sound insulation
-
Weather resistance and protection from UV radiations up to 10 years. It will not turn yellow after sun exposure and suitable for outdoor usage
-
High resistant to impact or fracture and virtually unbreakable
-
Easy fabrication and excellent thermoforming capabilities
-
Available in a variety of colours
Specifications
Thickness (+/- 5%) : 1.0mm – 30.00mm
Width: 1.22m – 2.1m
Length: Sheet (2.44m / 8ft)
(or any specific length)
Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity.
PC Sheets (Embossed)
Product Features
Optima+ polycarbonate (PC) solid embossed sheets enhance toughness and disperse the reflected light from the sheet surface to create a soft appearance thereby reducing light pollution. The finish provides a graceful appearance yet is abrasion resistant, making it suitable for various applications.
-
Lightweight and easy to install and fabricate
-
Good light diffusion
-
Flame retardant
-
Heat and sound insulation
-
Weather resistance and protection from UV radiations. It will not turn yellow after sun exposure and suitable for outdoor usage
-
High resistance to impact or fracture and virtually unbreakable
-
Easy fabrication and excellent thermoforming capabilities
-
Available in a variety of colours
Specifications
Thickness (+/- 5%) : 4.0mm – 6.0mm
Width: 1.22m – 2.1m
Length: Sheet (2.44m / 8ft)
(or any specific length)
Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity.
Multi-Walled (Clear / Colour)
Product Features
Optima+ multi-walled polycarbonate sheets offer a variety of structures and colours. These sheet products provide an outstanding balance of lightweight, high stiffness, ease of installation, excellent thermal insulation, UV and flame resistance, as well as good light transmission. Multi walled sheets give an attractive solution for industrial, commercial and residential glazing applications, as they are lightweight to be transport and facilitate easy and fast installation.
-
Light weight and high stiffness
-
Excellent light transmission
-
Ease of installation
-
Weather and UV resistance upto 10 years for outdoors applications
-
Heat insulation and flame resistance
-
Impact resistance
-
Excellent to fabricate and form
-
Broad portfolio of structures and colours
Specifications
Thickness: 4mm, 5mm, 6mm, 8mm, 10mm
,
Width: 915mm – 2100mm
Length: Max 5800mm or cut to size
Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity.
Contact us today for a FREE quotation
PMMA / Acrylic Sheets
Poly(methyl methacrylate) PMMA / Acrylic Sheets
Product Features
Optima+ PMMA (Acrylic) Sheet is a plastic material which exhibits glass-like quality but only half of the weight. We provide Acrylic sheets with outstanding durability and quality which are suitable for a wide range of applications.
-
Tough and durable plastic for replacing glass and polycarbonate (PC) when extreme strength is not essential
-
Scratch resistance and pleasing surface appearance
-
Resistant to inorganic acids
-
Good weather resistance and does not turn yellowish over a period of time. Suitable for outdoor usage
-
High clarity and light transmittance up to 93%
-
Easy to fabricate and excellent thermoforming capabilities
-
Available in a variety of colours
Specifications
Thickness (+/- 0.2mm) : 1.0mm – 30.00mm Maximum Width: 2100mm (2.1m)
Length: Can be customised
Colour: Clear, standard colours or custom colours
Standard Length: 1.22m x 1.83m / 1.22m x 2.44m
PETG (Polyethylene Terephthalate) Sheets
PETG Sheets
Product Features
PETG (Polyethylene Terephthalate Glycol) is thermoplastic polyester which provides good chemical resistance, durability and excellent formability for manufacturing.
PETG is both thermo-formable and vacuum-formable.
-
Good impact resistance and able to tolerate a tremendous amount of pressure without cracking
-
Suitable for food contact and commonly used for food containers and bottle for liquid beverages
-
Superior chemical resistance compared with other plastics
-
Outstanding thermo-forming and vacuum-forming capabilities
-
Cost effective
-
Sterilisable
-
Easy fabricated
Specifications
Thickness (+/- 0.1mm) : 0.5mm to 6mm
Maximum Width: 1200mm (1.22m)
Length: Can be customised
Colour: Clear, Standard colours or custom colours
Standard Length:
1.22m x 1.83m / 1.22m x 2.44m
Other Specialty Engineering Thermoplastic Sheets
ACM (Aluminium Composite Panel
ABS (Acrylonitrile Butadiene Styrene) Sheets
HIPS (High Impact Polystyrene) Sheets
Thickness: 1.0mm – 12.00mm
Standard sheet size: 1.22m x 1.83m / 1.22m x 2.44m
Maximum Width: 1.22m
Length: No limit (sheet). Can be customised
Colour: Natural or custom colour
Product Features
Optima+ ACM is a composite material made from aluminium and polyethylene. With its high rigidity, light weight characteristics and exceptional flatness, this product is a versatile decorative material used in major industries globally including: advertising boards, signage, barriers and construction cladding.
-
Ease of installation and fabrication
-
Excellent flatness and light weight
-
Easy maintenance
-
Enhanced forming performance
-
Uniform coating and wide range of colours
-
Eco- friendly
-
Exceptional UV resistance
Product Features
ABS stands for Acrylonitrile Butadiene Styrene. ABS is an impact resistant engineering thermoplastic and amorphous polymer. ABS is made up of three monomers: acrylonitrile, butadiene and styrene:
-
High rigidity
-
Good impact resistance, even at low temperatures
-
Good insulating properties
-
Good weldability
-
Good abrasion and strain resistance
-
High dimensional (Mechanically strong and stable over time)
-
High surface brightness and excellent surface aspect
-
Very good resistance to diluted acid and alkalis
-
Moderate resistance to aliphatic hydrocarbons. Poor resistance to aromatic hydrocarbons, halogenated Hydrocarbons and alcohols
Product Features
Polystyrene (PS) is one of the oldest thermoplastic polymers and is a non-crystalline thermoplastic resin. It can be divided into General Purpose Polystyrene (GPPS) and High Impact Polystyrene (HIPS).
HIPS can be produced by adding the polybutyl rubber particles.
-
Light Weight and Easy Handling
-
High GPPS is naturally transparent and widely used in a number of consumer products applications
-
Rigid
-
Low Density
Specifications
Panel Thickness: 2.0mm, 3.0mm, 4.0mm
Aluminium Layer Thickness: 0.1mm, 0.2mm, 0.4mm.1.0mm – 30.00mm
Width: 1.22m or upto 1.25m (for 4.0mm Panels)
Length: upto 24ft
Weight for 0.1mm aluminium layer: 3mm : 2.7kg/m2 ; 4mm : 4.1kg/m2
Tolerance: Width +/-2mm; Length +/-4mm; Thickness +/-0.2mm
Specifications
Specifications
Thickness (+/- 0.2mm): 1.0mm – 30.00mm
Standard sheet size: 1.22m x 1.83m / 1.22m x 2.44m
Maximum Width: Upto 2.1m
Length: Can be customised
Clear, standard colours or custom colours.
PP (Polypropylene) Sheets
Product Features
Polypropylene (PP) is a rigid and crystalline thermoplastic used widely in everyday objects like packaging trays, household products, battery cases, medical devices, etc. PP belongs to polyolefin family of polymers and is one of the top three widely used polymers today. Polypropylene has applications both as a plastic and a fiber in:
-
Automotive Industry
-
Industrial Applications
-
Consumer Goods, and
-
Furniture Market
It has the lowest density among commodity plastics.
HDPE Sheets
Product Features
High density polyethylene plastics is most commonly known as HDPE sheet plastic. This thermoplastic is made from ethylene molecules and is known to be both lightweight and strong. With more companies embracing sustainability initiatives, HDPE sheet popularity has skyrocketed as it can cut down on the materials used to produce and package products due to its weight and strength.
Typical features are :
-
Extremely lightweight yet durable
-
HDPE is easily moulded and transformed into just about any shape or design
-
High chemical and impact resistant, but also resistant to rotting, insects, mildew and mold
-
Good weatherability
-
HDPE does not shatter, rather it "bounces" back
-
Recyclable
Specifications
Thickness : 1.0mm – 12.0mm
Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity.
Colour or custom colour.
Specifications
Thickness : 1.0mm – 12.0mm
Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity.
Colour or custom colour.
Contact us today for a FREE quotation
Thin Gauge Polycarbonate & Packaging Film
GS Series (GS)
Product Features
Tenopex® graphic films and sheets offer the features of clarity, dimensional stability, heat resistance, as well as availability of different surface textures (glossy/matte/velvet/brushed). Our graphics grade is UL94V-2.
All Tenopex® PC films are process friendly for thermoforming, embossing, clean edge diecutting and printing without the need for pretreatment.
The versatile performance and fabricating features of all films provides a cost effective solutions in all applications
Specifications
Thickness : 0.125mm – 0.5mm (Roll) ; 0.5mm to 1.5mm (Sheet)
Width: 732mm - 1020mm for GS11. GS21/41/71/42 would be 930mm
Length: Please refer to Tenopex® Standard Dimension Specifications
Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity.
Thickness tolerance: Please refer to Tenopex® GS Series Inspection Standard
FR Series (FR)
Product Features
Our Tenopex® FR Insulation film combines flame retardant characteristics with the printability benefits of our Tenopex® Graphics series. It offers an excellent combination of properties, including:
-
Good dielectric strength
-
High Puncture resistance
-
UL94V-0 rating
This makes it an ideal choice for printing and insulation shields / barriers in the electrical and electronics industries.
Specifications
Thickness: 0.075mm – 0.5mm
Width: 930mm
Length: Please refer to Tenopex® Standard Dimension Specifications
Non-standard product (width, length, thickness) are available subject to a minimum order quantity.
Thickness tolerance: Please refer to Tenopex® GS Series Inspection Standard
Functional Films Series
Product Features
In addition to our standard series, Tenopex® films are also available for various functionalities purposes:
-
Hardcoat: GS11HC, available in thicknesses of 0.175mm to 1.5mm. This offers abrasion resistance coupled with good clarity of our Tenopex® PC films. Double side hardcoat is also available upon request.
-
Antistatic: GS11AS, available from 0.175mm to 1.5mm, offers surface resistivity of 9-11, making the films excellent for offset printing or high volume printing, in stringent environments.
-
UV Resistant: UV resistant upto 380nm and also available in customised colours upon request, this is an ideal choice for sun visors, goggles and stroller cover applications.
-
Anti Glare and Anti Fog: Customisation of such functional coatings are suitable for lens, goggles and automotive dials.
Specifications
Thickness: 0.125mm – 0.5mm (Roll) ; 0.5mm to 1.5mm (Sheet)
Width: 0.915m - 1.22m
Length: Please refer to Tenopex® Standard Dimension Specifications
Packaging Films
HIPS is a rigid plastic film that is easily thermoformed, printed, die cut and fabricated.
This material provides excellent dimensional stability and impact resistance.
The features of HIPS offer:
-
Excellent range of colours
-
Easy to machine and fabricate
-
Excellent moisture resistance
-
Electrical and static resistance
-
Environmentally friendly (recyclable)
Thickness :0.25mm-1.0mm (Roll) ; 0.25mm-1.5mm (Sheet)
Width: 0.5m - 1.22m
Length: Standard of 100kgs per roll, but can be customised.
Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity.
Thickness: 0.2mm-1.2mm
Width: 760mm
Length: Standard of 100kgs per roll, but can be customised.
Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity.
Contact us today for a FREE quotation
APET / RPET
Product Features
(R)/APET (Amorphous Polyethylene Terephthalate) is an engineered thermoplastic material of the polyester family.
This film offers excellent optical characteristics such as high gloss and transparency as well as good mechanical properties such as impact resistance and tensile strength. It is non-reactive to most chemicals and acts as an effective barrier.
All these properties, along with its ability to be easily formed, makes it a excellent choice for packaging applications. FDA food contact, antistatic and printable grades are also available.
Key features of our APET film and sheets are:
-
High impact strength (20% higher than PVC)
-
High optical clarity and gloss
-
Excellent chemical and electrical resistance / moisture barrier
-
Flexible and suitable for deep draw thermoforming
-
Environmentally friendly (recyclable and non toxic)
Specifications
Thickness : 0.16mm-1.0mm (Roll) ; 0.25mm-1.5mm (Sheet)
Width: 0.5m - 1.22m
Length: Standard of 100kgs per roll, but can be customised.
Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity.
GAG / GRG
Product Features
GAG/GRG is a co-extruded films with a middle layer of APET and outer layers of PETG.
It is highly transparent with excellent technical and thermoforming properties.
GAG/GRG provides the advantages of PETG such as printability without pre-treatment, sealing with high frequencies or adhesive. GAG/GRG is widely used for packaging of electronics, cosmetics, toys, medical equipment packing, stationery and gifts. It can also be used for signage and graphics applications such as labels, signs and cards.
It offers the same benefits of APET but with the additional features of :
-
Suitable for solvent, RF, or adhesive bonding
-
Printable without surface treatment
-
FDA certified
-
A co-extruded film of GRG, combining surface layers of PETG with APET core helps to reduce cost.
Specifications
HIPS
Product Features
Specifications
Optima+ Asia Pte. Ltd.
3 Seletar Road
#03-11
Singapore 807 012
Tel: +65 8128 2298
E-Mail: Stephen.lumb@optimaplusgroup.com
Web: www.optimaplusasia.com
Specialists In Engineering Plastics